How much does it cost to replace a radiator?
Swapping a radiator like for like in the same place usually costs £150 to £300 in labour across most of the UK, and £200 to £400 in London and the South East, according to a 2026 price guide from Fantastic Services, a firm that sells the work. All in, with the radiator, a standard single or double panel radiator comes to roughly £120 to £320 including VAT, while column, vertical and designer radiators run from £200 to £700 or more. A like for like swap takes one to two hours. Moving a radiator, fitting a bigger one or draining the whole system costs more.
Radiators last a long time, but not for ever. They rust from the inside, start to weep at the seams, or turn out to be too small for a room that never quite warms up. Replacing one is among the simplest heating jobs there is when the new radiator fits the old pipework, and it gets dearer quickly when it does not.
This guide sets out what radiator replacement costs in 2026, what moves the price, whether the whole system needs draining, and how to make sure a quote covers everything. All figures are ranges, not quotes, and each one is sourced.
What it costs to replace a radiator in 2026
There is no independent national survey of radiator replacement prices, so treat every figure here as a guide. The clearest breakdown we found is the 2026 radiator replacement price guide from Fantastic Services. It is a firm that sells the work, so read it as one company's view of the market. It puts a like for like swap, where the new radiator goes in the same place, at £150 to £300 in labour across most of the UK, rising to £200 to £400 in London and the South East. All in, with the radiator itself and VAT, it gives:
| Radiator | Most of the UK | London and the South East |
|---|---|---|
| Single panel | £120 to £240 | £150 to £300 |
| Double panel | £160 to £320 | £200 to £400 |
| Towel rail | £150 to £300 | £180 to £360 |
| Column | £200 to £500 | £250 to £600 |
| Vertical | £200 to £500 | £250 to £600 |
| Designer | £250 to £700 or more | £300 to £800 or more |
A second view comes from Homebuilding and Renovating, which quotes Patrick Garner, a Gas Safe registered engineer, in a guide updated in September 2025. It puts a professional fitting a new double panel radiator at around £200, and replacing three radiators, including draining and refilling the system, at £250 to £500 for a day's work. That fits the lower half of the ranges above.
Lead generation sites publish radiator prices too. We leave them out because they sell leads to the tradespeople they price.
Check whether a quote includes VAT. A business only has to register for VAT once its taxable turnover goes over £90,000 a year, according to GOV.UK, so many sole traders do not charge it and most limited companies do. On a £250 job, 20 percent is £50.
What changes the price
Whether the pipes line up
This is the biggest single factor. If the new radiator has the same pipe centres as the old one, the engineer closes the valves, takes the old radiator off its brackets and hangs the new one, often on new brackets. Fantastic Services says that kind of swap usually takes one to two hours. If the pipes are in the wrong place for the new radiator, the engineer has to alter the pipework, and the job grows.
Moving or upsizing the radiator
Putting a radiator on a different wall means new pipework, which Fantastic Services says costs more and, along with fitting a bigger radiator or draining the whole system, can take half a day or more. Pipework under a solid floor, or behind tiles, adds to that because the floor or wall has to be opened and made good.
The radiator itself
The radiator can be a small part of the bill or most of it. Homebuilding found a basic 600mm by 400mm single panel radiator for around £30 and a 1000mm by 600mm double panel for around £75, while a three column radiator from a well known maker cost nearly £400. Fantastic Services gives unit prices from £50 to £150 for a single panel up to £150 to £600 or more for a designer radiator, including VAT.
Draining the system
Fantastic Services says draining and rebalancing the whole system is usually charged separately. Whether it is needed depends on how many radiators are being changed, which is covered below.
Where you live
Fantastic Services says labour in London and the South East runs roughly 15 to 30 percent higher than in the North of England, Wales and Scotland. Our guide to what a plumber charges per hour has hourly and day rates if you are being quoted by time.
Do you need to drain the whole system?
For one radiator, usually not. Patrick Garner tells Homebuilding that a single radiator can be isolated by closing the valves at each end and drained on its own into a tray. Once you are replacing more than two, the system is normally drained down.
There is a good reason not to drain when you do not have to. Heating water contains inhibitor, a chemical that slows rust and the build up of sludge, and Homebuilding notes it has to be replaced after a drain down at extra cost. If the system is drained, ask the engineer to put fresh inhibitor back in and say so on the invoice. On a sealed system the boiler pressure will drop after any water is let out. Worcester Bosch says the gauge should read 1 to 1.5 bar when the system is cold, and the engineer should leave it there.
Replace, bleed or flush?
Before paying for a new radiator, check what is actually wrong with the old one.
- Cold at the top, warm at the bottom. That is trapped air. It is a free fix, and our guide on how to bleed a radiator shows how.
- Cold at the bottom, or cold in the middle. That usually points to sludge. If several radiators are the same, a flush may fix them all. Our guide to what a powerflush costs explains the options.
- Leaking from a valve. A valve or its gland can often be repaired or replaced without changing the radiator.
- Leaking from the body, or rusting through. Pinholes in the panel cannot be fixed properly. The radiator needs replacing, and the water it has been losing is diluting the inhibitor in the rest of the system.
- Working, but the room is still cold. The radiator may simply be too small. Homebuilding notes that one kilowatt is about 3,412 BTU and that a small 3m by 3m bedroom needs roughly 1kW. It also warns that catalogue outputs assume a hotter system than many homes run, so the real output can be lower than the label. Ask the engineer to size a replacement for the room.
Add a thermostatic valve while the radiator is off
Changing a radiator is the cheapest moment to fit new valves, because the work is already being done. Homebuilding puts a basic thermostatic radiator valve head at around £10, and Fantastic Services describes new valves as a small extra that is often worth adding. A thermostatic valve lets each room run at its own temperature. The Energy Saving Trust says heating controls, including thermostatic radiator valves, could save around £100 a year in Great Britain if they are installed and used well.
If you are also thinking about a heat pump, mention it now. Heat pumps run at lower water temperatures than most gas boilers, and our guide on whether to get a heat pump or a new boiler covers what that means for your radiators, so you do not pay to replace one twice.
Who should replace a radiator
Homebuilding says a competent DIYer can fit one or two radiators, and many plumbers and heating engineers will do it as a small job. Radiators carry water, not gas, so swapping one is not gas work. Anything that involves opening the boiler or touching a gas pipe is, and the law requires a Gas Safe registered engineer for that, as the HSE explains. You can check a card and registration on the Gas Safe Register.
If the radiator work is part of something bigger, such as a new boiler, that is a different job with its own rules and paperwork, and our guide to what a new boiler costs covers it.
Citizens Advice recommends getting more than one quote and agreeing the price and the work in writing before anything starts. For a radiator, the written quote should say:
- Who supplies the radiator, and its make, size and heat output.
- Whether new valves and brackets are included.
- Whether any pipework needs altering, and the price if it does.
- Whether the system will be drained, and whether fresh inhibitor goes back in.
- Whether VAT is included, and who takes the old radiator away.
Our guide on how to check a tradesperson is genuine covers the other checks worth doing.
Find a heating engineer near you
Post your radiator job free. Say how many radiators you want changed, whether they stay in the same place, and whether you have bought the new ones already. A local heating engineer or plumber gets back to you with a price or a time to visit. You pay the business directly, and nothing is taken online.
Or browse local businesses first: heating engineers in Birmingham, Wolverhampton, Coventry, Dudley, Walsall or Solihull, or plumbers in Birmingham. You can also browse all our home advice.
Key takeaways
- Fantastic Services, a firm that sells the work, puts a like for like radiator swap at £150 to £300 in labour across most of the UK and £200 to £400 in London and the South East in its 2026 price guide.
- All in, including the radiator and VAT, the same guide gives £120 to £240 for a single panel, £160 to £320 for a double panel and £200 to £500 for a column or vertical radiator outside London.
- Homebuilding, quoting a Gas Safe registered engineer in September 2025, puts a professional fitting a new double panel radiator at around £200, and three radiators with the system drained and refilled at £250 to £500 for a day.
- A single radiator can usually be isolated at its valves and drained on its own, so the whole system does not need draining. Replacing more than two usually means a full drain down.
- A like for like swap takes one to two hours. Moving a radiator, fitting a bigger one, or draining and refilling the system can take half a day or more.
- Heating controls, including thermostatic radiator valves, could save around £100 a year in Great Britain if installed and used well, according to the Energy Saving Trust, so a new valve is worth adding while the radiator is off.
Frequently asked questions
How much does it cost to replace a radiator in the UK?
A like for like swap in the same position usually costs £150 to £300 in labour across most of the UK, and £200 to £400 in London and the South East, according to the 2026 price guide from Fantastic Services. All in, a standard single or double panel radiator comes to about £120 to £320 including VAT outside London. Homebuilding, quoting a Gas Safe engineer, puts a fitted double panel radiator at around £200.
How long does it take to replace a radiator?
A like for like swap usually takes one to two hours, according to Fantastic Services. Moving a radiator, fitting a bigger one, or draining and refilling the whole system can take half a day or more. Homebuilding describes three radiators with a drain and refill as a day of work.
Do you have to drain the whole system to replace a radiator?
Not usually for one radiator. Homebuilding, quoting a Gas Safe engineer, says a single radiator can be isolated by closing its two valves and drained on its own. If more than two radiators are being replaced, the system is normally drained. Draining is best avoided when it is not needed, because the inhibitor in the water has to be replaced afterwards.
Can I replace a radiator myself?
A competent DIYer can, and Homebuilding says one or two radiators is within reach for many people. The risks are water damage from a valve that is not fully closed, airlocks and low boiler pressure afterwards. Radiators carry water, not gas, so it is not gas work, but anything that involves opening the boiler must be done by a Gas Safe registered engineer.
Is it cheaper to buy the radiator myself?
Sometimes, because you choose the price. A basic single panel radiator can cost around £30 and a large double panel around £75, according to Homebuilding. Some engineers charge more to fit a radiator they did not supply, or will not guarantee it, so ask before you buy. Make sure the pipe centres match the old one or the price will go up.
Should I replace the valves at the same time?
It is usually worth it. The radiator is already off, so fitting a new thermostatic radiator valve adds little time, and Homebuilding puts a basic TRV head at around £10. The Energy Saving Trust says heating controls, including thermostatic radiator valves, could save around £100 a year if they are installed and used well.
When should a radiator be replaced rather than repaired?
Replace it when it is leaking from the body rather than a valve, rusting through, too small to heat the room, or you want a different style or size. A radiator that is cold at the top usually just needs bleeding, and one that is cold at the bottom often has sludge, which a flush may fix without a new radiator.
Do I need a plumber or a heating engineer to replace a radiator?
Either can do it. Swapping a radiator is wet heating work on water pipes, so most plumbers and heating engineers take it on as a small job. If the job also involves the boiler, for example a full drain down that needs the boiler checked and restarted, or any work on gas pipes, the engineer must be Gas Safe registered by law. You can check that on the Gas Safe Register.
Sources
- Fantastic Services: radiator replacement cost, 2026 UK price guide (a firm that sells the service, no update date given, all in prices include VAT)
- Homebuilding and Renovating: installing a radiator, with Gas Safe registered engineer Patrick Garner (updated 19 September 2025)
- Energy Saving Trust: heating controls (last updated 28 September 2026)
- Worcester Bosch: how often should I need to top up the pressure in the heating system
- HSE: gas safety in the home, frequently asked questions
- Gas Safe Register
- Citizens Advice: before you get building work done
- GOV.UK: VAT registration, when to register